The Enviroheat 200EH1-14 is a compact all-in-one air-source heat pump hot water system designed for smaller Australian households. It features a 195-litre actual storage volume, programmable timer settings, multiple operating modes and a 1500W auxiliary heating element for dependable everyday hot water.
Model: 200EH1-14
Actual tank volume: 195L
Model: 250EH1-15
Actual tank volume: 246L
The Enviroheat 200EH1-14 absorbs heat from the surrounding air and transfers it into the water stored inside the integrated tank. This reduces reliance on direct electric heating compared with a conventional electric storage water heater.
Its compact monobloc design combines the heat pump and storage cylinder into one unit. The integrated digital controller provides timer programming, temperature adjustment, operating mode selection and hot water capacity monitoring.
A practical choice for smaller households and properties with moderate hot water requirements.
Supplied with a 10A plug and cord for connection to a suitable weatherproof power outlet.
The listed sound pressure level of 46dBA supports quieter everyday operation.
ECO mode can be programmed to operate during daytime solar generation periods.
| Specification | Details |
|---|---|
| Brand | Enviroheat |
| Model | 200EH1-14 |
| System Type | Monobloc Air-Source Heat Pump Water Heater |
| Nominal Product Size | 200L Class |
| Actual Tank Volume | 195L |
| Rated Voltage / Frequency | 220–240V / 50Hz |
| Electrical Connection | 10A Plug and Cord |
| Tank Rated Pressure | 0.7MPa |
| Tank Corrosion Protection | Magnesium Rod |
| Protection Rating | IPX4 |
| COP at 7°C | 3.04 |
| COP at 15°C | 3.39 |
| Auxiliary Heating Element | 1500W |
| Rated Heat Pump Power Input | 495W |
| Maximum Heat Pump Power Input | 865W |
| Maximum System Power Input | 1500W |
| Standby Power Input | 35W |
| Heating Time at 7°C | Approximately 5.50 Hours |
| Heating Time at 15°C | Approximately 4.68 Hours |
| Default Temperature Setting | 55°C |
| Temperature Setting Range with Heater | 35°C–75°C |
| Refrigerant Type | R134a |
| Refrigerant Charge | 0.9kg |
| Refrigerant GWP100 | 1430 |
| Maximum Refrigerant Working Pressure | 0.8 / 2.8MPa |
| Sound Pressure Level | 46dBA |
| Ambient Operating Range | -7°C to 45°C |
| STC Zones | Zones 1–4 |
| Water Inlet and Outlet Connection | G3/4" Female |
| Safety Valve Connection | G3/4" Female |
| Drain and Cold Water Connection | G3/4" Female |
| Product Dimensions | 600 × 629 × 1692mm |
| Overall Diameter / Width | Approximately 629mm |
| Net Weight | 91kg |
| Gross Weight | 103kg |
The built-in digital control panel provides easy access to water temperature settings, timer programming and operating modes. It also displays the available hot water level and system fault information.
Automatically manages heat pump operation to maintain reliable hot water availability based on demand.
Runs during programmed operating periods and is recommended for households with solar power.
Activates the 1500W auxiliary electric element for faster heating when extra hot water is required.
Keeps the system off while you are away and restarts it before your selected return date.
The system automatically raises the stored water temperature to 63°C once every seven days for sanitation.
Allows the electrical heating element to maintain hot water supply temporarily if the heat pump experiences a fault.
A thermostat and over-temperature protection device support safe system operation.
Prevents unintended controller changes while allowing normal system operation to continue.
The fan draws surrounding air into the heat pump.
The evaporator collects available heat energy from the air.
The compressor increases the refrigerant temperature.
Heat transfers through the micro-channel condenser into the tank.
The process continues until the selected water temperature is reached.
The unit must be installed vertically on a solid and level surface capable of supporting its filled weight.
The system requires sufficient airflow and must not be installed in a fully enclosed space.
Allow approximately 400mm above the system and suitable surrounding clearance for airflow and servicing.
Condensate water must be able to drain freely to an appropriate drainage point.
Share your current hot water system and property details.
We confirm available space, ventilation, drainage and electrical suitability.
Qualified installers complete the required plumbing and electrical work.
The system is filled, tested and programmed for correct operation.
Start enjoying reliable heat pump hot water for everyday use.
The relief valve lever should be operated at least once every six months.
The system should be drained and flushed during a major service approximately every five years.
The tank sacrificial anodes should be inspected periodically and replaced when required.
The condensate discharge pipe should be checked regularly for blockages or restricted flow.
| Component | Parts Warranty | Labour Warranty |
|---|---|---|
| Tank Cylinder | 5 Years | 1 Year |
| Compressor and Mechanical Components | 5 Years | 1 Year |
| Controller and Electrical Components | 5 Years | 1 Year |
| Sacrificial Anode, PTR Valve and ECV | 5 Years | 1 Year |
The model number is 200EH1-14.
The system is sold as a 200L-class model. The official actual tank volume is 195 litres.
The Enviroheat 200EH1-14 uses R134a refrigerant with a charge of 0.9kg.
The listed COP is 3.04 at 7°C ambient temperature and 3.39 at 15°C.
No. The 200EH1-14 is supplied with a 10A plug and cord for connection to a suitable weatherproof power outlet.
The default temperature is 55°C. The setting range with the auxiliary heater is 35°C to 75°C.
Yes. The listed ambient operating range is -7°C to 45°C. Outside this range, the auxiliary heater may operate to protect the heat pump.
Yes. The integrated controller allows programmed operating periods through ECO mode.
Yes. ECO mode can be programmed to operate during daylight hours to make better use of available solar generation.
Yes. Boost mode activates the 1500W auxiliary heating element for faster hot water recovery.
The manual lists 5 years parts and 1 year labour for the tank, compressor, mechanical components, controller, electrical components, sacrificial anode, PTR valve and ECV, subject to the full manufacturer warranty conditions.
Installation must be completed by appropriately qualified and licensed tradespeople in accordance with the manufacturer instructions and applicable Australian standards.
Get compact heat pump hot water, programmable operating modes and reliable everyday performance for your home.
Reliable 250L Heat Pump Enviroheat Pump Hot Water System 250L – 250EH1-15 The Enviroheat 250EH1-15 is a reliable all-in-one air-source heat pump hot water system designed for Australian households. It features a 246-litre actual storage...
GoGetaHeatPump specialises in cutting-edge heat pump technology and offers effective and environmentally friendly heating solutions for both residential and commercial environments.
