The AetherCore 220L is a compact all-in-one heat pump hot water system designed for smaller Australian households. It combines efficient R290 heat pump technology, a standard 10A electrical connection, four operating modes and aetherSmart monitoring for dependable and intelligent everyday hot water.
Recommended for: 1–3 people
Efficient hot water for smaller households.
Recommended for: 3–5 people
Reliable everyday performance for families.
Recommended for: 5–7 people
High-capacity hot water for larger homes.
The AetherCore draws heat from the surrounding air and transfers that energy into the water stored inside its integrated 220L tank. This reduces reliance on direct electrical resistance heating during normal heat pump operation.
Its all-in-one design keeps the heat pump and tank together in one compact unit. Four operating modes allow the system to prioritise efficiency, everyday performance, faster recovery or direct electric heating when required.
Uses R290 refrigerant with a factory charge of 395g for modern heat pump operation.
Maximum input current is listed at 9.8A, supporting installation with a suitable 10A electrical connection.
The brochure lists a noise level of 44dB(A) measured at one metre across heat pump operating modes.
Smart monitoring supports instant alerts, remote diagnostics and faster issue resolution.
| Specification | AetherCore 220L Details |
|---|---|
| Product | AetherCore All-in-One Heat Pump |
| Tank Capacity | 220L |
| Recommended Household Size | Approximately 1–3 People |
| Power Supply | 220–240V / 50Hz / Single Phase |
| Electrical Connection | 10A Plug |
| Maximum Input Current | 9.8A |
| Operating Modes | Economic / Standard / Booster / E-Heater |
| Electric Heating Element | 1.2kW |
| Refrigerant | R290 / 395g |
| Ambient Working Range | -7°C to 45°C |
| Ingress Protection Rating | IPX4 |
| Noise Level at 1 Metre | 44dB(A) |
| Tank Corrosion Protection | 2 × Magnesium Anodes |
| Net Dimensions | Ø640 × 1965mm |
| Packed Dimensions | 755 × 735 × 2100mm |
| Net Weight | 103kg |
| Gross Weight | 122kg |
| Smart Monitoring | aetherSmart |
| Warranty | 5 Years Parts and Labour |
Heating capacity: 3.3kW
Rated input: 0.66kW
COP: 5.00
Recovery: 62L/hour
Noise: 44dB(A)
Heating capacity: 3.5kW
Rated input: 0.72kW
COP: 4.86
Recovery: 76L/hour
Noise: 44dB(A)
Heating capacity: 4.7kW
Rated input: 1.92kW
COP: 2.45
Recovery: 101L/hour
Noise: 44dB(A)
Heating capacity: 1.2kW
Rated input: 1.2kW
COP: 1.00
Recovery: 25.8L/hour
Support: Direct electric heating
AetherSmart is designed to monitor system operation continuously and help identify issues quickly. Alerts can be sent to the homeowner, installer and Australian support team when a system issue is detected.
System monitoring can provide notifications when a potential issue arises.
Aether support teams and trained installers can diagnose certain issues remotely.
Better fault information helps technicians prepare the correct repair and reduce unnecessary downtime.
Designed for Australian homes and developed to perform in demanding local conditions.
Supported by trained aetherPro installers and Australian-based technical support.
AetherSmart provides real-time monitoring, proactive diagnostics and remote support capabilities.
Program the system to operate during solar generation or selected off-peak periods.
The fan pulls surrounding air into the heat pump.
The evaporator absorbs available heat from the air using refrigerant.
The compressor raises the refrigerant to a higher temperature.
Heat transfers into the water stored inside the integrated tank.
Heated water remains stored and ready for household use.
The system is designed around a maximum input current of 9.8A and a suitable 10A connection.
The integrated tank and heat pump design helps simplify product placement and system configuration.
The AetherCore measures approximately 640mm in diameter and 1965mm in height.
Installation should be completed by appropriately licensed and trained tradespeople.
Share your existing hot water system and household requirements.
We confirm available space, drainage, clearances and power access.
Qualified installers complete plumbing and electrical setup.
The controller, timer and aetherSmart connection are configured.
The system is tested and commissioned for everyday operation.
The brochure promotes a comprehensive five-year warranty covering parts and labour, helping provide confidence in long-term ownership.
Warranty registration, professional installation, approved operating conditions and the complete manufacturer warranty terms may apply.
The AetherCore has a listed water tank capacity of 220 litres.
The brochure recommends the AetherCore 220L for households of approximately one to three people.
It uses R290 refrigerant with a listed charge of 395 grams.
The brochure promotes a 10A plug connection and lists the maximum input current as 9.8A. Final electrical suitability should be confirmed by a qualified installer.
The system includes Economic, Standard, Booster and E-Heater operating modes.
The listed COP for the AetherCore in Economic mode is 5.00.
The listed recovery rates are 62 litres per hour in Economic mode, 76 litres per hour in Standard mode and 101 litres per hour in Booster mode.
The brochure lists a noise level of 44dB(A) at a distance of one metre.
The listed working range is from -7°C to 45°C.
AetherSmart is the system’s smart monitoring and support platform, designed to provide alerts, remote diagnostics and faster fault resolution.
Yes. The brochure states that the system can be programmed to run during solar production or selected off-peak periods.
The brochure promotes a comprehensive five-year warranty on parts and labour, subject to the manufacturer’s complete warranty conditions.
Get compact all-in-one hot water, R290 heat pump technology, intelligent monitoring and flexible operating modes for your home.
AetherMax 320L · 5–7 People AetherMax 320L All-in-One Heat Pump Hot Water System The AetherMax 320L is a high-capacity all-in-one heat pump hot water system designed for larger Australian households. It combines a 320L storage...
AetherHome 270L · 3–5 People AetherHome 270L All-in-One Heat Pump Hot Water System The AetherHome 270L is an all-in-one heat pump hot water system designed for medium-sized Australian households. It combines a 270L storage tank,...
270L R290 Heat Pump Aether HP270 270L All-in-One Heat Pump Hot Water System The Aether HP270 is a 270L all-in-one heat pump hot water system designed for Australian family homes. It features R290 refrigerant, enamel...
GoGetaHeatPump specialises in cutting-edge heat pump technology and offers effective and environmentally friendly heating solutions for both residential and commercial environments.
