The AetherHome 270L is an all-in-one heat pump hot water system designed for medium-sized Australian households. It combines a 270L storage tank, natural R290 refrigerant, four flexible operating modes, a standard 10A electrical connection and aetherSmart monitoring for reliable everyday family hot water.
Recommended for: 1–3 people
Efficient hot water for smaller households.
Recommended for: 3–5 people
Reliable everyday performance for families.
Recommended for: 5–7 people
High-capacity hot water for larger homes.
The AetherHome 270L collects heat from the surrounding air and transfers that energy into the water stored inside its integrated cylinder. This allows the system to heat water efficiently while reducing reliance on direct electric resistance heating during normal operation.
Its 270L capacity is designed for households of approximately three to five people. The all-in-one configuration combines the tank and heat pump into a single unit, while the four operating modes allow users to balance efficiency, hot water recovery and electrical support.
The 270L tank is designed to support the everyday hot water needs of households with approximately three to five people.
Uses natural R290 refrigerant with a listed factory charge of 395g.
The brochure lists a maximum input current of 9.8A, supporting a suitable 10A electrical connection.
AetherSmart supports system alerts, remote diagnostics and faster issue resolution.
| Specification | AetherHome 270L Details |
|---|---|
| Product | AetherHome All-in-One Heat Pump |
| Water Tank Volume | 270L |
| Recommended Household Size | Approximately 3–5 People |
| Power Supply | 220–240V / 50Hz / Single Phase |
| Electrical Connection | 10A Plug |
| Maximum Input Current | 9.8A |
| Available Operating Modes | Economic / Standard / Booster / E-Heater |
| Electric Heating Element | 1.2kW |
| Refrigerant | R290 / 395g |
| Ambient Working Range | -7°C to 45°C |
| Ingress Protection Rating | IPX4 |
| Noise Level at 1 Metre | 44dB(A) |
| Tank Corrosion Protection | 2 × Magnesium Anodes |
| Net Dimensions | Ø640 × 2025mm |
| Packed Dimensions | 735 × 735 × 2160mm |
| Net Weight | 112kg |
| Gross Weight | 131kg |
| Smart Monitoring | aetherSmart |
| Manufacturer Warranty | 5 Years Parts and Labour |
Heating capacity: 3.3kW
Rated input power: 0.66kW
COP: 5.08
Recovery rate: 62L/hour
Noise level: 44dB(A)
Heating capacity: 3.5kW
Rated input power: 0.71kW
COP: 4.93
Recovery rate: 76L/hour
Noise level: 44dB(A)
Heating capacity: 4.7kW
Rated input power: 1.91kW
COP: 2.46
Recovery rate: 101L/hour
Noise level: 44dB(A)
Heating capacity: 1.2kW
Rated input power: 1.2kW
COP: 1.00
Recovery rate: 25.8L/hour
Operation: Direct electric heating
AetherSmart is designed to monitor the heat pump around the clock and provide useful system information to the homeowner, installer and Australian support team when an issue is detected.
Receive system notifications when a potential operating issue is identified.
Trained aetherPro installers and support teams may diagnose certain system issues remotely.
Better fault information helps service agents arrive with the appropriate repair solution.
Developed for Australian households and designed to perform in local weather conditions.
Supported by certified aetherPro installers and an Australian-based support team.
AetherSmart supports proactive monitoring, fault detection and remote diagnostic capabilities.
Program the heat pump to operate during solar production periods or selected off-peak hours.
The integrated fan draws surrounding air into the heat pump.
The evaporator uses refrigerant to absorb available heat from the ambient air.
The compressor increases the temperature of the absorbed heat.
The heat is transferred into the water stored inside the 270L tank.
Heated water remains stored and available for household use.
A maximum input current of 9.8A supports connection to a suitable 10A electrical supply.
The integrated heat pump and storage tank design helps simplify the overall system layout.
The 270L tank provides practical hot water capacity without requiring separate heat pump and tank components.
Installation should be completed by appropriately licensed and trained plumbing and electrical professionals.
Share your household size, property details and current hot water system.
We confirm available space, clearances, drainage and electrical access.
Qualified installers complete the plumbing and electrical setup.
The timer, operating mode and aetherSmart connection are configured.
The system is tested and commissioned for everyday family use.
The Aether brochure promotes a comprehensive five-year warranty on parts and labour, providing added confidence for long-term ownership.
Warranty registration, correct installation, approved operating conditions and all manufacturer warranty terms and exclusions apply.
The AetherHome has a listed water tank capacity of 270 litres.
The brochure recommends the 270L AetherHome model for households of approximately three to five people.
It uses R290 refrigerant with a listed factory charge of 395 grams.
The brochure promotes a 10A plug and lists a maximum input current of 9.8A. Final electrical suitability must be confirmed by a qualified installer.
The AetherHome includes Economic, Standard, Booster and E-Heater operating modes.
The listed COP for the AetherHome in Economic mode is 5.08.
The listed COP in Standard mode is 4.93.
The listed recovery rates are 62 litres per hour in Economic mode, 76 litres per hour in Standard mode and 101 litres per hour in Booster mode.
The brochure lists an operating noise level of 44dB(A) measured at one metre.
The listed ambient working range is from -7°C to 45°C.
AetherSmart is the system monitoring and support platform designed to provide alerts, remote diagnostics and faster fault resolution.
Yes. The system can be programmed to operate during solar production periods or selected off-peak electricity times.
The brochure promotes a comprehensive five-year warranty on parts and labour, subject to the full manufacturer warranty terms and conditions.
Get family-sized hot water, efficient R290 heat pump technology, intelligent monitoring and flexible operating modes in one all-in-one system.
AetherMax 320L · 5–7 People AetherMax 320L All-in-One Heat Pump Hot Water System The AetherMax 320L is a high-capacity all-in-one heat pump hot water system designed for larger Australian households. It combines a 320L storage...
AetherCore 220L · 1–3 People AetherCore 220L All-in-One Heat Pump Hot Water System The AetherCore 220L is a compact all-in-one heat pump hot water system designed for smaller Australian households. It combines efficient R290 heat...
270L R290 Heat Pump Aether HP270 270L All-in-One Heat Pump Hot Water System The Aether HP270 is a 270L all-in-one heat pump hot water system designed for Australian family homes. It features R290 refrigerant, enamel...
GoGetaHeatPump specialises in cutting-edge heat pump technology and offers effective and environmentally friendly heating solutions for both residential and commercial environments.
